Grinding wheel with the grinding process, will become dull, so in the course of the use of constant repair, so that the grinding wheel to change the sharp. The following describes how a better dressing wheel so that it maintains a higher grinding efficiency and quality.


        The sharpening process is a sharpening process that grinds the abrasive grains of a superhard abrasive wheel. In this process, the need to remove the abrasive between the binder and abrasive wheel abrasive, grinding with a strong performance of the abrasive wheel prominent bonding agent, the formation of sharp cutting edge. Sharp must also remove small material from the pores of the grinding wheel surface to prevent the grinding force from acting on the grinding wheel from increasing and the grinding force on the grinding wheel to increase, which will cause vibration and surface burn.


Without proper sharpening, even the best wheels can not achieve the high quality and dimensional uniformity of machined parts. In fact, when you invest in high-quality grinding wheel, in order to obtain high grinding performance, it is very good dressing it is very important.


Shaping can be said to be part of the wheel preparation work, it is with the ordinary grinding wheel repair at the same time. For the superhard abrasive wheel, two processes are carried out separately, the first wheel to shape. In the use of superabrasive grinding wheel grinding, shaping is the use of plastic tools or rollers, repair sharp is often the use of a ceramic binder dressing rod, in the shaping is completed, the grinding wheel for sharpening treatment.


It is important to ensure that the spindle bearings are at a certain temperature (such as a normal grinding wheel condition) before the grinding wheel can be trimmed and trimmed. This avoids damage to the part geometry and non-normal wear of the grinding wheel and dressing tool. Care must be taken with dressing tools because they are generally made of hard, abrasion-resistant but brittle diamond material and are very sensitive to minor cracks and crushing due to minor impact, stress.


Because the diamond shaper itself is a tool, need to remain very sharp. The use of a dull finishing tool to dress the wheel surface will make the grinding wheel dull. In order to maintain a high-quality and sharp diamond dressing tool, at regular intervals, the need for 1/8 turn to rotate a single point or with the tip of the trimming tool. The number of rotations can be determined according to the trimming situation, according to experience, at least once a day rotation. For chisel heads and forming dressing tools, they are usually rotated 180 ° before they are dull.


Most cylindrical grinding machines place the part and wheel on a horizontal line. The highest point of the outer circle of the part and the highest point of the outer circle of the grinding wheel are called the parts / grinding wheel contact point. The diamond dressing tool should dress the grinding wheel as close as possible to the part / grinding wheel contact point. It is even more important to dress the grinding wheel for the internal grinding machine with the diamond dressing tool near the highest point of the outer circle of the grinding wheel (ie the part / grinding wheel contact point at the time of grinding).