Precautions for using of grinding wheel

1, start the wheel must be 4060 seconds after the stability of speed grinding, grinding tools should stand on the side of the wheel, not on the wheel to prevent grinding wheel broken broken flying out of wounding.

2, the same piece of grinding wheel, the prohibition of two people at the same time, not allowed in the grinding wheel side grinding, grinding, the operator should stand on the side of the wheel, do not stand in front of the wheel to prevent grinding wheel crack, Occurrence of accidents, while not allowed to wear gloves operation, prohibited around the reactor operation and in the grinding laugh and slapstick.

3, grinding the standing position should be in an angle with the wheel, and the contact pressure should be uniform, non-impact grinding wheel, so as not to fragment, the grinding wheel is limited to grinding tools, not grinding heavy materials or thin iron plate and soft materials Aluminum, copper, etc.) and wood products.

4, grinding edge, the operator should stand on the side of the wheel or inclined side position, do not stand on the front wheel, while the tool should be slightly higher than the wheel center position. Not too much force to prevent slippage injury hand.

5, the wheel is not allowed to touch the water, we should always keep dry to prevent water loss after the balance, an accident.

6, does not allow grinding wheel in the larger long objects, to prevent the shattered grinding wheel flying wounding.

7, not a single hand holding the workpiece for grinding, to prevent falling off in the protective cover card broken wheel.