Centerless cylindrical grinding characteristics form

1. Two-wire External Grinding center hole does not play, do not support the workpiece thimble. Since the center of the workpiece uncertain, the grinding allowance is relatively reduced.

2. External grinding mill can not axially grooved workpiece, grinding perforated workpiece, does not correct the position of the hole axis, low concentricity of the workpiece.

3. Cut inside his cell under normal circumstances can only be processed on a roller rolling on the workpiece can therefore, particularly suitable for grinding sets of groups, and other thin-walled parts. Grinding sets of parts because the parts are positioning themselves cylindrical reference. Therefore it can not be corrected within the original uranium with external error between.

4. Centerless grinding time maneuvering and loading and unloading time coincidence, easy to implement grinding process automation, high production efficiency.

 

5. In the centerless grinding process, the change in position of the workpiece center depends on the size of the original error of the workpiece before grinding, process system rigidity, grinding, dosage and other process parameters (high workpiece center, pallets angle, etc.);

6 centerless grinding movement of the workpiece, the machine depends on the uniformity of the transmission chain, the workpiece shape, weight, guide wheels and supporting materials, surface morphology, grinding with a star and other process parameters.

7. Centerless grinding machine for a long time to adjust, to adjust the machine's technical requirements are also higher, does not apply to single and small batch production.