Keep cool

Appropriate use of cooling fluid, can speed up the dressing speed and improve the efficiency of finishing. Experience dictates that a 3/8 inch diameter coolant can remove a significant amount of heat from the dresser and extend the life of the dresser. When the diamond dressing tool passes through the grinding wheel, install a coolant nozzle that fills the entire surface of the grinding wheel or continuously refills the coolant to the diamond dressing tool. Never allow the dressing tool to exit the coolant after the dresser has been brought into contact with the grinding wheel. Otherwise it will make the diamond dressing tool, in the cold, hot extreme temperature changes, cracks or rupture.

The use of filters for high-precision cooling of the filter, to avoid dirt or chips in the cooling fluid in the cycle. Contaminated coolant can quickly wear the wheel, increasing the number of wheel dressing. Dry grinding of the grinding wheel is only possible during dry grinding (only in this case the cooling of the diamond dressing tool can be interrupted). Turn off the coolant and allow the wheel to spin for a few minutes before going to work every day. This prevents the wheel from cracking.