Grinder maintenance procedures


First, the device can not be around other debris, equipment surfaces should be kept clean


Second, the production operator should be strictly in accordance with standard operating procedures for production operations,
Non-random operation


Third, the device must be grounded circuit, in order to protect the personal safety


Fourth, the wheel prior to installation must undergo a rigorous inspection,
Defects such as cracks
The wheel is absolutely not allowed to install and use


Fifth, check the characteristics of the wheel meets the requirements,
Wheel and spindle size
No matches


Sixth, the free wheel fitted to the wheel spindle,
Can not squeeze,
Grinding wheel
And the inner diameter of the spindle and chuck with the gap appropriate to avoid too large or too small


Seven fastening tightness of the wheel should be pressed to drive the wheel without slippage
Appropriate, not too tight


Eight,
Adjusted balance test performed after idling wheel need to install protective covers,
air
Turn test time should not be less than
2
minute


Nine, equipment operation without abnormal noise


Ten, the equipment for damage or missing parts


eleven,


Love machine, non rough handling


Twelve, prohibit the use of steel tap Tools
Grinding wheel


XIII, abnormal timely shutdown occurs when the equipment is reported