精选博文
What Are Superabrasives?
Superabrasives make up a special category of bonded abrasives designed for grinding the hardest, most challenging work materials. Because...
2016年7月19日星期二
balance scaffold made of high quality material for the balance shafts,
the heat treatment and high precision machining and assembly therefore
precision, stable performance is an ideal machine tool accessories.
larger than 125mm diameter wheel must be balanced so that its center of
gravity coincides with the axis of rotation of the wheel.Unbalanced
wheel at high rotational vibration occurs, affecting the processing
quality and precision machine tools, it can also cause serious damage to
the machine and wheel fragmentation. Caused by an imbalance of the
original storm largely uneven density portions of the wheel, asymmetric
geometry and installation eccentricity. Therefore, before installing the wheel must be balanced, the balance wheel static balance and dynamic balance are two kinds. Under
normal circumstances, just as static balance, but in high-speed
grinding (speeds greater than 50m / s) and high speed grinding, it must
be balanced.When
the balance wheel mounted on the mandrel balance, then install the kind
of wheel axle flat onto the balance wheel balance rail bracket, the
wheel will swing back and forth, until the swing stops. If
the grinding wheel imbalance, it always goes below the heavier portion.
In this case the position of the movable balancing blocks to reach
equilibrium.
订阅:
博文评论 (Atom)
没有评论:
发表评论